Easy Chute - Lashing Straps

Product Description

The Easy Chute is a brand new product developed in cooperation with Easy Chute USA and the R&D team of 123BigBags. It is a flexible rubbish chute with chutes that can be assembled together! In our test phase, we built a rubbish chute of 27 meters (89 feet) high!

Insert the top orange loops of your chute into the openings of the filling board. Next, attach these loops to the lashing straps. Last, place your rubbish and begin your waste disposal.

Extra Tips: Use a beam or slat longer than the larger of your window to fix the Easy Chute™. Slide the beam into the two lashing straps. Then place the beam inside the window frame and deploy the chute outside. The beam will prevent your chute from falling off the window.

Much cheaper than a standard rubbish chute, this innovative system allows you to simply and efficiently remove rubbish from your construction site. Easy to use, foldable, saving time and money, our woven rubbish chutes are the perfect alternative to rubbish chute rental. If used correctly, you can reuse them multiple times for almost all kinds of debris. This new type of rubbish chute is the ideal solution for quick and easy debris removal.

Each Easy Chute is 3 meters (118 inches) long and is equipped with four loops to attach an additional chute. Be aware when you assemble several chutes together: the effective length of one additional chute will then be 2,40 meters as we use a 60 cm overlap between the chutes to ensure safe connections between them. For example, to have a 12 meters rubble chute, you need a total of 5 chutes as 1 x 3,00m + 4 x 2,40m = 12,60 meters. Therefore 2 chutes attached to each other will measure 5,40m long as 1 x 3,00m + 1 x 2,40m = 5,40 meters.

How to use our Easy Chute:

VIDEO: http://www.youtube.com/embed/I0uNOK85Tg4

First scan the QR code that is printed on our filling board. You will be redirected to a 2 minutes video that will show you, step by step, how to proceed. Follow the instructions carefully to make sure that you use the Easy Chute in the most optimal conditions, and safely. You will see three holes in the filling board while you only use two. Why is that? To give you flexibility and freedom in your construction projects. You may need to use the third and the fourth loop depending on your situation.
Keep in mind that we recommend you to keep the chute as vertical as possible between the top of the rubble chute and your skip or bulk bags. It will prevent the Easy Chute from wearing out too much weight.
Extra tips: bag or pre-pack your heavy stones and sharp material before you throw them into the chute. Your Easy Chute will last longer.

Need extra big bags and rubble sacks to complete your renovation or construction project? Check out all 123BigBags for the building industry.